Task
Design and manufacture an injection mould for a CPU socket, ensuring moulding accuracy of ±0.02 mm and a service life of over 200,000 cycles.
Case study · Radio electronics · 2025
Mould for a CPU socket
ToolingRadio electronics2025Series production
Injection mould for serial moulding of a CPU socket. Turnkey cycle from drawing to mould trials at the customer's site.
Solution
Designed and manufactured the injection mould. Selected the tooling material and moulding parameters. Ran mould trials at the customer's site and performed fine-tuning.
Result
The mould was accepted into operation by the customer. Service life — over 200,000 cycles, moulding accuracy — within ±0.02 mm.
Specifications
Technical parameters
- Cycles
- > 200,000
- Accuracy
- ±0.02 mm
Deliverables
Mould design documentationMoulding process chartTrial acceptance report
Process
Project timeline
01 / 04
Drawing · 3D model
Received the part drawing, agreed the 3D model of the mould.
02 / 04
Manufacturing
Manufactured the injection mould at our own facility.
03 / 04
Trials
Visited the customer's site for mould trials and fine-tuning.
04 / 04
Handover
Handed the mould over into operation with a set of documentation.
Photo gallery
Process documentation
Photos and measurement reports will be added once the visual material is ready. The extended pack is available under NDA.
01
Drawing
02
Process
03
Finished part
04
CMM report
Some data is withheld under our agreement with the customer. Specific parameters, photos and measurement reports are available under NDA.
Request the packRelated case studies
From the same field
Radio electronics2025
Connector RS-32 — replacement of a foreign analogue
R&D with a full set of design and process documentation. Serial production launched for an instrumentation plant.
Read more
Instrumentation2023
Brackets, busbars, electrical contacts
Set of stamping dies with process routing and gauges for the line launch.
Read more
Radio electronics2025
Injection mould for an electrical connector
Plastic injection moulding: connector insulator. Mould trials at our own facility.
Read more
Inquiry
Send a drawing —
we'll quote within 24 hours
Fill in the form or contact us directly — any channel works.
ПН–ПТ · 09:00–18:00 · МСК